UL1005 Stainless Lever Handle: Sizes, Weight and How to Order

Updated 2026-11-09 · RAYEN 雷茵

UL1005 is one of the lever handles in our lever handles with the most photographs: on timber office doors, on dark doors beside a cylinder, on glass-walled meeting rooms. This guide sets out what is known about it and what you confirm with us.

What are the sizes of UL1005?

• Lever length: 130mm, from the spindle centre to the tip.
• Lever section: 20mm.
• Rose: Ø50mm round, 9.5mm thick.
• 68mm on the drawing from the door face to the outside of the lever.
• Weight: 0.82kg.
• Material: stainless steel.

The photos show a straight lever with a textured grip running from a short polished neck. The drawing places the lever square to the rose, with no drop at the tip.

How heavy is it compared with the rest of the family?

The stainless UL levers that list a weight run from 0.38kg to 0.82kg.

UL745 has the same 130mm length, the same 20mm section and the same Ø50mm rose at 0.38kg. UL1005 is 0.82kg, more than twice that. If weight in the hand is part of what your customer buys, this is the one to sample. If you need the lightest lever on the same rose, compare UL745 and UL1024 at 0.4kg.

What finishes does UL1005 come in?

Satin stainless and matt black. The photographs also show light and dark grip tones and a woven grip. Those are not on the finish list, so if you want one of them, send the photo and ask; do not specify it from the picture alone. Our lever handle finishes list explains the names.

Which lock does UL1005 work with?

No lock case is printed for this lever, so it is confirmed per order. Tell us the lock you will use, or the one already in the door, and we will confirm the spindle and fixings. If the door has a mortise lock, measure the backset and the centre distance; our guide to lock case numbers shows how. The photos show it beside separate cylinders and thumb turns, which suits a rose lever: the lever and the cylinder each have their own rose.

What door does it suit?

It is listed for timber and metal doors. Door thickness is not printed, so send yours. The lever handle finder narrows the range by door thickness and lock case if you are still choosing.

Why choose a stainless lever like UL1005?

On stainless steel the surface is the metal itself, so satin stainless stays satin stainless. For a busy office or a public building, that is usually the reason. For the full comparison, read zinc alloy or stainless lever handle.

What should you check before ordering?

• The lock in the door, or the lock you will buy, by brand and model if known.
• Door thickness, measured on the finished door.
• Clearance: a 130mm lever with 68mm off the door needs that room beside walls and door stops.
• Finish across the door: hinges and stops in satin stainless or matt black to match.
• Old rose marks on a refurbishment: the new rose is Ø50mm.

What to write on your order

UL1005, satin stainless, Ø50mm rose, lock or lock case, door thickness, timber or metal door, quantity of pairs. If some doors need a lever on one side only, list them on their own line.

Next step

Send a photo of your lock and the door thickness to [email protected] and we will confirm the fit. To ask about samples or the grip options in the photos, message the factory owner on WhatsApp from the contact page.

Open the selection tool：Lever Handle Finder by Door Thickness and Lock Case→